FLORA Roller Blind Cord Drawn(Bamboo)

Mounting your new bamboo blinds is as simple as putting up a picture frame. Please read the following easy instructions to help fit your blinds. ProvidedBlind with rolling mechanism attachedMarked Measuring stickScrewsPlastic plugs for Concrete wallsRequirementsElectric Drill or PunchScrewdriverMarker Pen/PencilDrill bits 3mm, (6mm (1/4in) for concrete)Instructions1. Using the measuring stick mark the two points where the screws will fit. The side marked with two lines should come on the right side. Make sure that the points are 2cm from any obstruction above them2. Drill Holes into the marked points. In case you are drilling into concrete, use a 6mm Drill bit, otherwise use a 3mm Drill bit.3. Fix the screws. If the wall is concrete, first hammer the plastic plugs into the wall and then screw the screws into the plugs.4. Hang the curtain. 5.Check the rollup mechanism. Operating Your Blinds Rolling Up the BlindsPull the handle down till the right for the blind is reachedMove the handle to the right and release.Releasing The BlindPull the handle downMove the handle to the leftRelease the handle slowly upwards to the required heightMove the handle to the right and release to lock